PathFinder 350D Plus

Wide range of tube types
The PF350D Plus has the ability to decap primary tubes from all major tube manufacturers, be these screw type or plug type caps. Incoming primary tubes of varying sizes are presented in an input rack from where they are transferred to a processing carousel – first for identification and then, if required, for decapping. The tubes, whether decapped or not, are then sorted into various destination racks ready for testing or distribution.

Improved Safety 
Automating the unloading and processing of tubes not only reduces handling of tubes but eliminates RSI injuries from manually removing caps from primary tubes.

Increased Capacity
The PathFinder™ 350D Plus has been designed for higher pre-analytical workloads than the PathFinder™ 350D. It has twice the deck capacity along with a higher sample throughput up to 600 tubes per hour. The extra deck capacity allows for additional input and destination racks, which increases the walk-away time and maximises the overall system throughput.

Tube Bar code alignment
The PathFinder™ 350D Plus has the ability to not only place samples tubes into analyser racks but also to align the tube bar code label on the sample tube with the viewing window in the analyser rack if required.